🏠 Trusted Local Roofers
Metal Roof Repair in Hinckley
A dripping seam or a rusting fixing on a metal roof rarely fixes itself. Metal Roof Repair in Hinckley from Tate & Sons Roofing stops a small leak before it works its way into the timber below, whether your roof sits over a garage in Burbage or a standing-seam barn conversion out past Market Bosworth. We repair steel, aluminium and zinc roofs across the town and the wider borough, and every repair carries a 10-year workmanship guarantee.
This page covers the warning signs worth acting on, how we decide between a seam reseal, a panel swap or a full recoat, real cost ranges, and what repair day looks like from start to finish. Start with a free drone survey and a written price before anything is agreed — no ladder against your wall just to take a look, and no charge either way. Metal roof repair is one part of the wider service we offer as a roofing contractor across Hinckley.
- Fully Insured
- 10-Year Guarantee
- 5-Star Rated
Quick Free Estimate - No Obligation
We're not just roofers – we're your neighbours.
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.
Spot the Warning Signs Before a Small Leak Turns Into a Big One
Metal roofs are tough, but they are not immune to failure. Most problems start small — a lifted fixing, a hairline gap at a seam — and stay hidden until a heavy downpour finds the weak spot.
Watch for these signs on your Hinckley roof:
- Rust spots or orange streaks running down a panel
- A seam that drips, whistles or weeps after heavy rain
- Panels that lift, rattle or bang in strong wind
- Fixings backing out, leaving a raised or shiny screw head
- Paint or coating that has chalked, faded or worn through to bare metal
- Ceiling stains that appear or spread after rain
- Water sitting on a low-pitch section for more than 48 hours
A well-maintained steel or aluminium roof can last 40 to 70 years, but that figure only holds if small faults get picked up early. Roofs sitting along the old Watling Street corridor and the exposed ridge near Higham on the Hill take a harder battering from wind-driven rain than a sheltered street in town, and loose fixings there tend to show up sooner. A free drone survey settles the question with footage, not guesswork.
Seam Leaks, Rust or Loose Fixings — Get the Right Fix Decided
Three things cause almost every metal roof repair call-out in Hinckley: a failed seam, corrosion working through the coating, and fixings that have backed out or sheared. Each needs a different fix, and getting the diagnosis right the first time saves you paying twice.
A seam failure is usually the cheapest problem to solve, since it is a localised gap rather than damage to the metal itself. Rust and corrosion are more serious, because once the protective coating breaks down, the metal underneath keeps thinning even after the leak is sealed. Loose or sheared fixings often point to age-related fatigue in the panel around the fixing hole, which sometimes means the panel itself needs replacing rather than just the screw.
Steel, aluminium and zinc all corrode differently, and mixing repair methods across materials is one of the most common mistakes we see on older roofs. A standing-seam aluminium system, for example, weathers in its own way over decades — this aluminium roofing case study from Building magazine shows the kind of long-run panel detailing involved. If your roof has failed beyond repair across most of its area rather than in one section, a full replacement under our metal roofing installation service is usually the better long-term value than repeated patching.
Repair Options Compared: Seam Reseal, Panel Replacement or Recoating
Here is how the three main metal roof repairs compare, so you know roughly what to expect before a surveyor sets foot on your roof.
| :-: | :-: | :-: | :-: |
| Repair type | Typical cost | What it involves | Best for |
| Seam reseal | £150–£450 | Cleaning out the old sealant, refitting the seam and applying a new weatherproof seal or clip | A single leaking or lifted seam on an otherwise sound roof |
| Panel replacement | £250–£900 per panel (larger sections up to £1,500+) | Removing the damaged panel and fitting a matched replacement, tied into surrounding flashings | Rusted-through, dented or storm-damaged panels |
| Full recoat | £30–£60 per m² (whole roof often £2,000–£6,000+) | Cleaning, rust treatment and a new protective coating applied across the full roof | Widespread coating failure or early-stage corrosion across most of the roof |
What Metal Roof Repair Really Costs in Hinckley
Most metal roof repairs in Hinckley fall between £150 and £3,000, depending on how much of the roof is affected and how it is reached. A small seam reseal or a handful of fixings sits at the lower end. A recoat across a full garage or extension roof, or several damaged panels, pushes the price toward the top of that range.
What pushes a price up or down:
Labour in this part of Leicestershire generally runs £200–£300 per day, and that figure typically makes up close to half the total job cost. These are general market ranges, not a quote for your roof — a fixed price needs a survey.
- **Size of the affected area*— you pay for the damaged section, not the whole roof
- **Material*— steel, aluminium and zinc each need different fixings, sealants and coatings
- **Access*— a single-storey garage roof costs less to reach than a steep pitch above a two-storey home
- **How far corrosion has spread*— surface rust is a cheap fix, rust that has thinned the metal is not
- **Age and discontinued profiles*— matching an older corrugated or box-profile sheet can add cost if the exact profile is no longer made
What Happens Before We Get On Your Roof
Every job starts with a free drone survey, so we see the whole roof — seams, flashings, valleys and fixings — before anyone climbs a ladder. That footage tells us exactly which repair applies, rather than guessing from the ground.
We then send a written quote that sets out the repair type, the materials involved and the price, with nothing added once work starts. On premium standing-seam roofs around Market Bosworth, where the panel profile and finish matter as much as the fix itself, we match materials and colour before ordering anything. You get a clear answer, not a sales pitch, and you are free to think it over before agreeing to anything.
Repair Day: How We Fix It Right the First Time
A typical metal roof repair follows the same order on every job:
- Site made safe, with access equipment set up for the section being repaired
- Damaged area cleaned back to bare, sound metal
- Corrosion treated or the affected panel removed
- Seam, panel or coating repaired using matched materials
- Surrounding fixings, flashings and laps checked and secured
- Area tested for water tightness before we pack up
- Site cleared and the repair explained to you before we leave
Most single-section repairs, such as a seam reseal or one or two panels, are finished within a day. A full recoat across a larger roof usually takes two to three days, weather allowing. Wet or high-wind days can push a schedule back, and we build a realistic allowance in rather than promising a date we cannot keep.
How We Prove the Repair Holds
A repair is only worth paying for if it lasts. Before we leave your Hinckley property, we check the repaired section under close inspection and, where practical, with a water test to confirm the fix is holding.
Every repair we carry out is backed by our 10-year workmanship guarantee, so if a seam we have resealed or a panel we have fitted fails through our workmanship, we come back and put it right at no extra cost. That guarantee sits alongside the free drone survey we can carry out again in future, so you always have proof of condition, not just our word for it.
Stop Future Repairs Before They Start
A little upkeep between repairs keeps a metal roof performing for decades rather than needing constant attention.
- Clear leaves, moss and debris from valleys and gutters each autumn
- Check exposed fixings for lifting or backing out after storms
- Look for early rust spots and deal with them before they spread
- Keep an eye on sealant around rooflights, vents and abutments
- Book a free drone survey every few years, or after any major storm
A proactive protective coating applied before rust takes hold is far cheaper than waiting for corrosion to eat through a panel. Our roof coatings and sealing service extends the working life of a sound metal roof without the cost of full panel replacement. None of this needs a specialist visit — just a regular look, and a call to us if anything seems off.
Why Hinckley Trusts Tate & Sons With Their Metal Roof
You are not just paying for a sealant tube and a new sheet of metal — you are paying for whoever fits it. Daniel Whitmore, our project manager and lead roofer, handles the leadwork and detailing that metal roof repair depends on, and he runs the day-to-day site work on every job across Hinckley and the surrounding villages. He is part of the crew that turns up to fix your roof, not just the man who quoted it.
Founder James Tate started out on the tools more than 20 years ago and still quotes the majority of jobs personally, so the person weighing up your roof is the one standing behind the finished repair. Between us we bring 40 years of combined team experience, hold NVQ Level 2 and 3 qualifications in Roofing, and carry CSCS cards. Sophie Bennett, our office manager, keeps quotes, scheduling and aftercare running smoothly from the first phone call onwards. Read more about the people behind the work on our About Tate & Sons Roofing page.
Areas We Serve Across Hinckley and Bosworth Country
We repair metal roofs across Hinckley and the surrounding borough. If your area is not on the list below, call us anyway — there is a strong chance we already cover you.
- Hinckley (LE10)
- Burbage (LE10)
- Barwell (LE9)
- Earl Shilton (LE9)
- Sapcote (LE9)
- Sharnford (LE10)
- Wolvey (LE10)
- Higham on the Hill (CV13)
- Sutton Cheney (CV13)
- Stoke Golding (CV13)
- Market Bosworth (CV13)
- Nuneaton (CV10 / CV11)
- Bedworth (CV12)
Got Questions?
Your Metal Roof Repair Questions, Answered Properly
How do I know if my metal roof needs repairing rather than replacing?
Localised rust, a single leaking seam or a handful of loose fixings almost always point to a repair rather than a replacement. A roof needs replacing instead when corrosion has spread across most of the panels, when several sections have thinned through, or when the roof is decades old and has already been patched more than once. A free drone survey settles the question with footage rather than a guess from ground level.
How much does metal roof repair cost in Hinckley?
Most repairs fall between £150 and £3,000, with a single seam reseal at the lower end and a full recoat or multiple panel replacements toward the top. Access, material and how far corrosion has spread all affect the final figure. A written quote follows the survey, with nothing added once work starts.
Can a leaking seam be resealed without replacing the whole panel?
Yes, in most cases. A seam failure is usually a localised gap in the sealant or clip rather than damage to the panel itself, so cleaning it out and refitting a new weatherproof seal or clip solves the problem without touching the surrounding metal. Panel replacement only becomes necessary if the metal around the seam has corroded or thinned.
How long does a metal roof repair take to finish?
A single seam reseal or a panel swap is usually finished within a day. A full recoat across a larger roof typically takes two to three days, depending on size and weather. We build a realistic weather allowance into every schedule rather than an optimistic one designed to win the job.
What causes rust and corrosion on a metal roof?
Rust starts once the protective coating on a steel roof wears through, exposing bare metal to rain and damp air. Cut edges, where sheets were trimmed during fitting, are especially vulnerable, since they were never protected by the factory coating in the first place. Trapped moisture at laps, fixings and valleys accelerates the process, which is why regular checks catch it while it is still a cheap fix.
How long does a metal roof repair last, and is it guaranteed?
A properly carried out seam reseal, panel replacement or recoat should last many years, and a full recoat can add a further decade or more of protection to a sound roof. Every repair we carry out is backed by our 10-year workmanship guarantee, so if our work fails, we return and fix it at no extra cost to you.
Can mixing metals on my roof make a repair fail faster?
It can. When two different metals sit in contact with each other and get wet, one corrodes faster than it would on its own — a process called galvanic corrosion. Copper flashing fitted directly against a steel or aluminium roof is a common example we see on older properties, and a repair that ignores this will fail again within a few years. Matching compatible materials, or isolating dissimilar metals properly, is part of how we specify every repair.
Does wind exposure along the A5 and M69 make Hinckley roofs need repair more often?
Yes, for properties directly exposed to it. Roofs along the old Watling Street corridor and near the M69 take a steady battering from wind, and that constant flexing loosens fixings and opens up seams faster than on a sheltered street in town. We see more callouts for lifted fixings and seam gaps from these exposed spots than from properties tucked behind other buildings.
Are standing-seam roofs on newer Market Bosworth conversions repaired differently to older corrugated roofs near Higham on the Hill?
Yes. Standing-seam panels, common on premium barn conversions around Market Bosworth, rely on concealed clips and folded joints rather than exposed fixings, so a repair usually means addressing a clip or seam detail rather than a screw. Older corrugated roofs near Higham on the Hill more often need fixing replacement or corrosion treatment at exposed screw heads. We carry stock and fixings suited to both systems, so the right repair goes on the roof it was designed for.
Book Your Free Drone Roof Survey Before That Leak Spreads
See exactly what your metal roof needs before any work starts. No ladders, no pressure — just a clear picture from a local Hinckley team.
Every month a failed seam or a rusting panel is left alone, water works its way further into the structure beneath it, and a repair that could have cost a few hundred pounds turns into a much bigger job. A quick, free survey today tells you exactly where you stand, and often the right fix is smaller and cheaper than you feared. Book now, get an honest quote, and get your metal roof sorted properly — first time.
Call the Hinckley team today on 01455 242595, or request your free drone survey online. We're already working across your area.
Book Your Free Drone Roof Survey
See exactly where your roof stands, with no obligation and no pressure. Call our Hinckley team or request your free drone survey today.
Get in Touch
Tate & Sons Roofing — Hinckley Office
10 Brosdale Drive, Hinckley, LE10 0SW
📞 01455 242595
✉️ [email protected]