🏠 Trusted Local Roofers
Guttering Installation and Replacement in Hinckley
Building an extension, finishing a new build, or simply tired of a gutter system that was never right for your Hinckley roof? Guttering installation and replacement in Hinckley is where you choose the material, profile and size that actually suits your property, rather than accepting whatever came with the house. Tate & Sons Roofing fits new guttering systems across Hinckley, Burbage and the wider borough, from a single extension run to a full new-build property out near the M69 corridor.
This page walks you through the materials on offer, the profiles that matter, how a system gets sized to your roof, and what fitting day looks like. If your existing guttering is already failing — sagging, leaking at every joint, pulling away from the fascia — our dedicated gutter replacement and installation page covers the repair-or-replace decision in more depth. For everything else guttering-related, our guttering specialists across Hinckley handle the full range of work, start to finish.
- Fully Insured
- 10-Year Guarantee
- 5-Star Rated
Quick Free Estimate - No Obligation
We're not just roofers – we're your neighbours.
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.
Choose the Right Gutter Material for Your Hinckley Property
Three materials cover almost every guttering job we quote around Hinckley. Each brings a different balance of cost, lifespan and looks, and the right pick depends on your property, your budget, and how long you want the system to last without another visit from us.
UPVC guttering is the standard choice on most modern homes and extensions. It costs the least, needs no painting, and a competent crew can fit a full house in a day. It will not rot or rust, though on a south-facing elevation strong summer sun can fade the colour over 15 to 25 years.
Aluminium guttering sits in the middle. Seamless aluminium is formed on site in one continuous run, so there are far fewer joints to fail, and a well-fitted system typically runs 25 to 30 years before it needs replacing. It suits detached homes and larger rooflines where fewer joints genuinely matter.
Cast iron guttering is the traditional choice, and often the required one on listed buildings and homes within a conservation area. It carries genuine period character, handles ladders and falling branches better than plastic, and can last well over 100 years with occasional repainting. It costs considerably more to buy and fit, and it is heavy — a single length weighs many times what the equivalent UPVC section weighs, so fixings and fascia strength both need checking first. Where a genuine period profile matters but budget or weight rules out true cast iron, our cast iron gutter restoration and replacement service covers both the real thing and the cast-effect alternative.
Around the newer estates near Sapcote and Stoney Stanton, most new-build plots go up in UPVC, since the material matches the standard specification and keeps costs sensible. On the older streets nearer Hinckley town centre and out toward Market Bosworth, aluminium or cast iron often suits the property better, both for looks and for planning reasons.
Half-Round or Deep-Flow — Get the Profile Right, Not Just the Material
Material is only half the decision. The profile — the actual shape and depth of the gutter channel — decides how much water the system can carry before it overflows.
Half-round profile is the standard shape on most UK homes and suits a typical roof up to around 50 to 60 square metres of effective area. It is simple to keep clear, since the curved inner surface does not trap debris the way sharper profiles can.
Deep-flow (sometimes called ogee or high-capacity) profile looks similar in width but can carry close to double the water volume of half-round. You need it once effective roof area climbs past roughly 55 square metres, on steep pitches, on large detached homes, or wherever an extension has increased the catchment area draining into one run. It sits slightly more prominently on the roofline, which is worth knowing before you choose it purely on capacity.
Sizing correctly matters more than most homeowners realise, because UK gutter design is normally based on a rainfall intensity of 75mm per hour under BS EN 12056-3. Leicestershire is not among the wettest counties, but a poorly sized system on a large roof will still overflow in a heavy summer downpour. You can see just how much rainfall UK properties handle in an average year on the Met Office's UK rainfall data, which shows how much variation there is even within a fairly compact area like ours. We calculate effective roof area, pitch and downpipe capacity for every quote, rather than fitting whatever profile happens to match the old system.
New Build or Extension — Getting Guttering Right From the Start
Fitting guttering on a new build or a fresh extension is a different job to replacing a failing system. There is no old gutter to match, which means you get a genuine free choice of material and profile rather than being constrained by what is already there.
The sequence on a typical job runs the same way every time:
A standard three-bedroom semi typically takes a single day to fit complete, once fascias are ready to take the brackets. An extension run is usually a half-day addition to another job. If your extension also needs new fascias and soffits to carry the guttering, our fascias and soffits service is worth pricing alongside the guttering itself, since fitting both together saves a second scaffold visit.
- Confirm roof area, pitch and elevations draining into each run
- Size the gutter profile and downpipe count against that catchment
- Fit fascia brackets at the correct fall — roughly 1 in 350 to 1 in 600 toward the outlet
- Install gutter lengths, corners and outlets, jointed or seamless depending on material
- Fit downpipes, running water clear of the wall and away from foundations
- Test the full run with a hose before we leave, checking for pooling or overflow
New-build plots around Sapcote and the wider Stoney Stanton corridor often come with a builder-grade gutter system that was priced down to a minimum spec. If you are self-building or project-managing an extension yourself, specifying the material and profile before the roofer arrives is the only way to avoid inheriting a system that is undersized for your actual roof.
What Guttering Installation Really Costs in Hinckley
Cost comes down to material, length, profile and access. As a general guide, UPVC guttering runs £30 to £70 per metre fully fitted, aluminium £55 to £180 per metre depending on profile and finish, and cast iron £80 to £275 per metre once specialist fitting is included. A full system on a typical semi-detached home usually totals £600 to £1,000 in UPVC, or £1,000 to £1,600 in aluminium.
What pushes a price up or down:
These are general market ranges, not a quote for your property — two houses the same size can price very differently once profile, access and fascia condition are factored in. A fixed price needs a survey.
- **Material*— UPVC costs least, cast iron costs most
- **Profile*— deep-flow adds roughly £40 to £80 in materials over half-round on a typical house
- **Access*— a two-storey detached home needs more scaffold or tower time than a bungalow
- **Fascia condition*— rotten timber behind the gutter usually adds £15 to £30 per metre to replace
- **Number of outlets and downpipes*— more corners and elevations mean more fittings
- **Like-for-like versus upgrade*— moving from UPVC to cast iron on an existing property costs more than fitting cast iron from scratch on a new build
UPVC vs Aluminium vs Cast Iron — A Straight Comparison
| :-: | :-: | :-: | :-: |
| Material | Typical cost per metre (fitted) | Typical lifespan | Best for |
| UPVC | £30–£70 | 15–25 years | Most homes, extensions, new builds, straightforward budgets |
| Aluminium | £55–£180 | 25–30 years | Detached homes, larger rooflines, fewer visible joints |
| Cast iron | £80–£275 | 50–100+ years | Period, listed and conservation-area properties |
Book a Fitting Window That Suits a Live Site
Guttering on a new build or extension usually has to fit around other trades, and getting the timing wrong holds up the roofline finish for everyone else on site. We coordinate fitting dates around your build programme, not the other way round.
Once fascias and soffits are fixed and the roof covering is on, guttering is normally a same-week job, and we can often turn it around within a day or two of confirming the go-ahead. If your project also needs new roofline trim, our UPVC roofline installation service covers fascias, soffits and guttering together as one coordinated fit, which is usually the tidiest and most cost-effective way to finish a new elevation.
Extensions around Burbage in particular often add a second roof plane draining into an existing run that was never sized for the extra water. We check the combined catchment area before quoting, not just the new section, so the finished system copes with the whole roof rather than just the new bit.
Keep a New System Working as Well in Year Ten as Day One
A correctly sized, well-fitted gutter system needs very little attention, but a few habits keep it performing for its full lifespan.
- Clear leaves and moss from gutters and outlets each autumn
- Check brackets and joints after any storm with strong wind
- Keep an eye on downpipes for slow drainage, a sign of a partial blockage
- Book a free drone survey every few years to catch movement early
Trees near Hollycroft Park and similar mature planting across Hinckley's older gardens shed heavily into nearby gutters every autumn, and a system left unchecked for a couple of seasons will silt up regardless of how well it was fitted. If a gutter you already have is sagging, leaking, or pulling away from the fascia rather than simply needing a clean, that is a repair-or-replace decision rather than a fresh installation, and our gutter repairs team can assess it on the same visit as a free survey.
Why Hinckley Builders and Homeowners Choose Tate & Sons
You are choosing the crew that fits your guttering, not just a price on a quote sheet. Daniel Whitmore, our project manager and lead roofer, runs the day-to-day on site and has fitted new guttering systems across every material we offer, from standard UPVC on new-build estates to genuine cast iron on the period properties around Market Bosworth. He specifies the right profile for your actual roof rather than defaulting to whatever is quickest to fit.
Founder James Tate started out on the tools more than 20 years ago and still quotes the majority of jobs personally, so the person pricing your guttering is the one who understands how it needs to perform. Between us we bring 40 years of combined team experience, hold NVQ Level 2 and 3 qualifications in Roofing, and carry CSCS cards. Sophie Bennett, our office manager, keeps quotes, scheduling and aftercare running smoothly, particularly useful when guttering has to slot into a live build programme. Read more about the people behind the work on our About Tate & Sons Roofing page.
Areas We Serve Across Hinckley and Bosworth Country
We fit new guttering systems across Hinckley and the surrounding borough. If your area is not on the list below, call us anyway — there is a strong chance we already cover you.
- Hinckley (LE10)
- Burbage (LE10)
- Barwell (LE9)
- Earl Shilton (LE9)
- Sapcote (LE9)
- Sharnford (LE10)
- Wolvey (LE10)
- Higham on the Hill (CV13)
- Sutton Cheney (CV13)
- Stoke Golding (CV13)
- Market Bosworth (CV13)
- Nuneaton (CV10 / CV11)
- Bedworth (CV12)
Got Questions?
Your Guttering Installation Questions, Answered Properly
What is the best material for new guttering in Hinckley?
UPVC suits most modern homes, extensions and new builds, since it costs the least and needs no maintenance beyond an annual clear-out. Aluminium suits detached homes and larger rooflines where fewer joints and a longer 25 to 30 year lifespan justify the higher cost. Cast iron suits period and listed properties, particularly where the local planning authority expects a traditional profile. The right choice depends on your property's age, your budget, and how long you want the system to last before it needs replacing again.
How much does new guttering cost to fit in Hinckley?
UPVC guttering typically costs £30 to £70 per metre fully fitted, aluminium £55 to £180 per metre, and cast iron £80 to £275 per metre. A full system on a typical semi-detached home usually totals £600 to £1,000 in UPVC or £1,000 to £1,600 in aluminium. Profile, access and fascia condition all affect the final figure, so a fixed price always needs a survey first.
Do I need deep-flow guttering or is half-round enough?
Half-round suits most standard roofs up to around 50 to 60 square metres of effective area, and it is the simplest profile to keep clear. Deep-flow becomes worth the extra cost once your roof area exceeds that, on steep pitches, on large detached homes, or where an extension has added a second roof plane draining into one run. We calculate your effective roof area before recommending either profile, rather than guessing from the pavement.
Can I choose cast iron guttering on a new extension, or does it have to match the existing house?
You can specify cast iron on a new extension even if the main house currently has UPVC, though most homeowners prefer to match the existing system unless the property sits in a conservation area. Where planning conditions apply, particularly around Market Bosworth and Stoke Golding, cast iron or cast-effect UPVC may be the expected standard regardless of what the rest of the house currently has. We check any planning conditions before quoting so the choice does not cause problems later.
How long does it take to fit new guttering on a standard house?
A standard three-bedroom semi typically takes a single day to fit complete once the fascias are ready to take the brackets. An extension run usually adds only half a day to another job. Larger detached properties or full cast iron systems can take two to three days, since cast iron is heavier and needs more careful handling than plastic.
Does my new build guttering need to be a specific size, or will any standard system do?
New build and extension guttering should be sized to the actual roof area draining into it, not fitted as a standard size by default. UK design is normally based on a rainfall intensity of 75mm per hour under BS EN 12056-3, and undersized guttering will overflow in a heavy downpour regardless of how well it is fitted. We calculate roof area, pitch and downpipe capacity for every new installation before recommending a profile.
What is the difference between seamless and jointed guttering?
Seamless aluminium guttering is formed on site in one continuous run, so there are far fewer joints along its length to fail over time. Jointed systems, typically UPVC, are made from fixed-length sections connected by union brackets with a rubber seal inside each joint. Jointed systems cost less and are easier to repair section by section, while seamless systems reduce the number of potential leak points on a long, uninterrupted roofline.
Will new guttering affect how water drains away from my foundations?
Yes, properly fitted guttering is one of the main things protecting your foundations and walls from water damage. Downpipes should discharge into a drain, soakaway or water butt rather than directly against the wall or onto ground that slopes back toward the house. On new builds and extensions, we plan downpipe routing as part of the installation, not as an afterthought once the gutter itself is up.
Do new-build estates around Sapcote and Stoney Stanton get a good standard of guttering as built?
It varies. Volume house-builders often specify a minimum-cost UPVC system sized to the smallest acceptable standard, which copes fine in normal weather but can struggle on a larger roof plan or during a heavy summer downpour. If you are project-managing a self-build or extension in that corridor, specifying the profile and material yourself before the roofer arrives is the only reliable way to avoid inheriting an undersized system.
Book Your Free Drone Roof Survey Today
Every season a new build or extension goes without properly sized guttering, water finds the weak point first — a fascia board, a foundation, or a wall that was never meant to take a direct soaking. A free drone survey shows exactly what your roof needs before a single bracket goes up, with a clear written price and nothing added later.
Call the Hinckley team today on 01455 242595, or request your free drone survey online. We're already working across your area.
Book Your Free Drone Roof Survey
See exactly where your roof stands, with no obligation and no pressure. Call our Hinckley team or request your free drone survey today.
Get in Touch
Tate & Sons Roofing — Hinckley Office
10 Brosdale Drive, Hinckley, LE10 0SW
📞 01455 242595
✉️ [email protected]