🏠 Trusted Local Roofers
Gutter Repairs Market Harborough
A tired gutter costs you little until the day it fails. Then water spills down the wall, soaks the fascia and finds its way inside. We handle gutter repairs in Market Harborough every week, from a single dripping joint to a whole run pulling off the fascia. Most faults are a repair, not a full replacement, and we tell you which one you actually need.
This page walks you through the common faults, what each repair involves, real 2025 to 2026 prices, and how we trace a leak back to its cause. Gutter repairs sit alongside the wider guttering services across Market Harborough we offer. Start with a free drone survey and a written quote before any work begins — no ladders up just to take a look, and no charge either way.
- Fully Insured
- 10-Year Guarantee
- 5-Star Rated
Quick Free Estimate - No Obligation
We're not just roofers – we're your neighbours.
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.
Spot a Failing Gutter Before It Rots Your Fascia
A gutter rarely fails all at once. Catch the signs early and a quick repair holds it, before the fascia or brickwork gets involved.
Watch for these:
- Water sheeting over the front edge in heavy rain
- A steady drip from one joint long after the rain stops
- A run that sags or dips in the middle
- Green streaks or moss growing down the wall below
- Gutter pulling away from the fascia board
- A downpipe that gurgles, backs up or overflows at the top
- Damp patches on the wall or a stain on an upstairs ceiling
Not every drip means the gutter is finished. A single failed joint or a loose bracket is a small fix caught in time. Left alone, the same water runs behind the gutter and soaks the fascia timber. A soft fascia then needs replacing too, which turns a cheap repair into a bigger job. Homeowners across Market Harborough call us at that early stage, and we keep the cost down for them.
Repair or Replace? You Get the Honest Call, Not the Biggest Bill
One bad joint does not mean the whole gutter is done. A failed seal, a cracked section or a loose bracket is almost always a repair. We swap the part, reseal the joint or rehang the run, and you are watertight again.
Replacement makes more sense when the whole system is worn out. Gutters over twenty years old, sagging in several places, with brittle plastic and cracked joints along the length, are past patching. Fixing one joint on a run like that just moves the leak along a few feet. We see this on older homes around Lubenham and Foxton, where a run has been patched two or three times already.
We check the full run before advising either way. A free drone survey shows the joints, brackets and downpipe outlets that a ground-level look always misses. You get the footage, not just our word for it. If a repair does the job, we say so. If a new run genuinely works out cheaper over time, our Guttering Installation and Replacement page covers that route in full.
Common Gutter Faults and What Each Repair Involves
Most call-outs come down to five faults. Each has a typical cause and a typical fix, and the right one depends on how far the damage has spread. The table below sets out what we see most, with real repair figures for the Market Harborough area.
A leaking joint is the fault we see most. The old seal perishes, and water drips through the union where two lengths meet. We cut out the failed sealant, clean the faces and fit a fresh seal or a new union clip. A cracked section is just as simple, since we remove the broken length and slot in a matching piece.
| :-: | :-: | :-: | :-: |
| Fault | Usual cause | Typical repair cost | Repair or replace |
| Leaking joint | Failed seal or perished union clip | £60–£90 | Repair — reseal or renew the joint |
| Sagging run | Too few brackets or a dropped fall | £60–£120 | Repair — rebracket and reset the fall |
| Blockage | Leaves and moss in gutter or downpipe | £40–£120 | Repair — clear and flush through |
| Cracked section | Frost, UV or impact on brittle plastic | £70–£150 | Repair — swap the single section |
| Loose bracket | Stripped screw or soft fascia timber | £50–£100 | Repair — refix into sound timber |
A sagging run needs more care. Too few brackets, or one that has pulled loose, lets the gutter drop and hold water. We add brackets and reset the fall so it drains cleanly again. Where the fascia timber behind it has gone soft, that has to be sorted first, or no bracket will hold for long.
What Gutter Repairs Cost in Market Harborough
Cost comes down to three things: the fault, the height of the run, and access.
As a general guide, a leaking joint runs roughly £60 to £90, and a sagging run rebracketed lands around £60 to £120. Clearing a blocked gutter or downpipe sits near £40 to £120, while swapping a cracked section is around £70 to £150. Most small gutter repairs across the town fall between £60 and £250, with the average job landing near £215.
What pushes a price up or down:
- **Height and access*— a run reached by ladder costs far less than one behind an extension needing a tower
- **How many faults*— one joint is cheap, but a run with three failing joints adds up
- **Material*— plastic parts are cheap, while cast iron or aluminium repairs cost more
- **Fascia condition*— soft timber behind the gutter has to be sorted before the repair holds
- **Downpipe work*— renewing a blocked or split downpipe runs roughly £80 to £250
These are general market ranges, not a quote for your gutter. Two homes on the same street can price differently once height, access and fascia condition come into it. The only way to a firm figure is a proper look, which is exactly what our free drone survey gives you, followed by a clear written price with nothing added later. A fixed price needs a survey.
How We Trace a Leak Back to Its Real Cause
Water is a liar. It shows up on a ceiling or wall in one spot, while the fault sits a metre or two away along the run. Seal the wet patch and you fix nothing, because the water simply finds the same weak joint again. This is where a proper look pays off.
Michael Tate, our founder, built the business on one rule: fix the cause, not the symptom. On a leak call, we trace the damp back to where the water actually gets in. That might be a failed joint uphill, a bracket letting the run sag, or a blocked outlet backing water over the edge. We fix that, not the stain it left behind.
A drone survey makes this quick and safe. We see every joint, bracket and outlet along the run without a ladder against your wall. You get honest advice on what caused the leak, and a repair that stops it for good. Homes around Great Bowden and Kibworth Beauchamp get the same careful check, whatever the size of the job.
A Blocked Downpipe Is the Fault Behind Most Overflows
When a gutter sheets water over the front in heavy rain, the gutter itself is often fine. The outlet or downpipe below it has blocked, so the water cannot drain fast enough and spills over the edge. Leaves, moss and grit build up over the seasons and choke the flow.
We clear the gutter, flush the downpipe and check the outlet runs freely again. Where a downpipe has split or pulled apart at a joint, we renew that section so it carries water cleanly to the drain. A downpipe that runs into a blocked gully needs that gully clearing too, or the backup just returns.
Left standing, an overflow keeps the wall wet and works damp into the brickwork below. Sorting the blockage early is cheap, and it protects the wall and fascia from the slow damage that follows. Our Valley Gutter Repairs page covers the hidden gutters that run between two pitched roofs, which block and overflow in much the same way.
Keep Your Gutters Working With a Twice-a-Year Check
Gutters last longest when small faults get caught early. None of this needs a specialist, just a look a couple of times a year across your Market Harborough home.
- Clear leaves and moss from the gutter each autumn
- Watch for water sheeting over the edge in heavy rain
- Check joints and brackets stay firm and sealed
- Book a free drone survey if you spot any warning sign above
On older and listed homes, cast iron gutters need the same care and reward it well. For an independent reference on looking after gutters and downpipes on period property, the guidance from the Department for Communities on listed building gutters and downpipes is a sound place to read up before any work.
Why Market Harborough Homeowners Call Tate & Sons First
You are not just buying a repair, you are buying whoever carries it out. Ryan Tate, our project manager, handles the guttering and roofline work on the tools, from rehanging a sagging run to renewing a downpipe. He is part of the same crew that turns up to your home, not just the man who quoted it.
Founder Michael Tate started his apprenticeship at sixteen and built the firm on surveying properly and fixing the cause. He traces damp back to its source, so a leak gets solved once, not patched every season. Between us we carry over 45 years of combined experience, hold NVQ Level 2 and 3 qualifications in Roofing Occupations, and keep CSCS cards and NFRC trade-body membership. Read more about the people behind the work on our About Tate & Sons Roofing page.
Areas We Serve Across Market Harborough and the Harborough District
We repair gutters across Market Harborough and the surrounding Welland Valley villages. If your area is not on the list below, call us anyway, since there is a strong chance we cover you.
- Market Harborough (LE16)
- Great Bowden (LE16 7)
- Little Bowden (LE16 8)
- Lubenham (LE16 9)
- Foxton (LE16 7)
- Medbourne (LE16 8)
- Kibworth Beauchamp (LE8)
- Great Glen (LE8 9)
- Fleckney (LE8 8)
- Husbands Bosworth (LE17 6)
- Desborough (NN14 2)
Got Questions?
Your Gutter Repair Questions, Answered Properly
Why is my gutter overflowing in heavy rain?
Nine times out of ten, the outlet or downpipe below has blocked. Leaves and moss build up and stop the water draining fast enough, so it spills over the front edge. Sometimes the run has lost its fall and holds water in the middle instead of carrying it to the outlet. We clear the blockage, check the fall and flush the downpipe, so it drains cleanly again. A gutter that overflows only in the heaviest rain still needs a look before the wall stays wet.
How do you fix a leaking gutter joint?
We cut out the old perished seal, clean the faces with spirit, and fit a fresh seal or a new union clip. The joint is where two lengths of gutter meet, and the seal there is the first part to fail with age. A proper repair uses gutter sealant that stays flexible as the plastic expands and contracts. Smearing general silicone over the top rarely lasts a season. Done right, a resealed joint holds for years.
Can a sagging gutter be repaired without replacing it?
Yes, in most cases. A sag comes from too few brackets or one that has worked loose, which lets the run drop and hold water. We add brackets and reset the fall so it drains to the outlet again. The gutter itself is usually sound. The one exception is when the fascia timber behind it has gone soft, since no bracket holds in rotten wood. We sort that first, then rehang the run.
What does gutter repair cost in Market Harborough?
Most small gutter repairs fall between £60 and £250, with the average job near £215. A leaking joint runs roughly £60 to £90, clearing a blockage sits around £40 to £120, and a cracked section is near £70 to £150. Height and access move the figure most, since a run behind an extension costs more to reach. A free drone survey gives you an exact written price rather than a rough guess over the phone. A fixed price needs a survey first.
My gutter is pulling away from the fascia. Is that serious?
It needs sorting soon. A gutter pulling off the fascia lets water run behind it, straight onto the timber rather than into the gutter. The bracket has usually failed, or the screw has stripped its hole. Left alone, the water rots the fascia, and then both the fascia and the gutter need work. Caught early, it is a quick refix into sound timber. We check the fascia condition as part of the repair.
Should I repair or replace my gutters?
Repair almost always wins when the fault is one joint, one bracket or one cracked section. Replacement makes sense when the whole run is old, brittle and sagging in several places, with joints failing along the length. Fixing one spot on a worn-out run just moves the leak along. We check the full length on a drone survey and give you the honest call, not the biggest invoice. Often a repair buys you many more good years.
How often should gutters be cleared?
Twice a year suits most homes, once in late autumn and once in spring. Homes under trees around Foxton and Lubenham fill faster and may need clearing more often. A blocked gutter backs up, overflows and works damp into the wall below. A few minutes clearing leaves each season heads off a bigger repair later. If you cannot reach it safely, we clear it as part of a survey visit.
Do you repair cast iron gutters on older homes?
Yes. Plenty of period and listed homes around Market Harborough still run original cast iron, and it is worth keeping. We reseal joints, refix brackets and renew sections to match, rather than swapping the lot for plastic. Cast iron lasts for decades when it is looked after properly. On a listed building, matching the original material keeps it right, and we advise on that before any work starts.
Book Your Free Drone Roofline Survey Today
See exactly what your gutters need before any work starts. No ladders, no pressure, just a clear picture from a local Market Harborough team.
Every week a leaking gutter waits, water works deeper into the fascia and wall behind it. A quick, free survey today tells you exactly where you stand, and often the fix is smaller and cheaper than you feared. Book now, get an honest quote, and protect your home before the next downpour finds the weak spot.
ð 5 Hood Close, Market Harborough, LE16 9XS
ð 01858 457600
Call the Market Harborough team today on 01858 457600, or request your free drone survey online. We're already working across your area.
Book Your Free Drone Roof Survey
See exactly where your roof stands, with no obligation and no pressure. Call our Market Harborough team or request your free drone survey today.
Get in Touch
Tate & Sons Roofing — Market Harborough Office
5 Hood Close, Market Harborough, LE16 9XS
📞 01858 457600
✉️ [email protected]