🏠 Trusted Local Roofers
Guttering Installation and Replacement Market Harborough
Your gutters do a quiet job until the day they stop. Old, split or sagging guttering sends rainwater straight down your walls, and that soaks brickwork, rots fascia boards and leaves damp inside. Tate & Sons Roofing handles guttering installation and replacement in Market Harborough and across the Harborough District, from a single tired run to a full roofline in one go.
This page covers the signs you need new gutters, the material choices — uPVC, aluminium, cast iron and steel — profiles like half-round and ogee, seamless systems, and what a full replacement really costs. It sits alongside the wider guttering services across Market Harborough that we offer. Start with a free drone roofline survey and a written price before any work begins — no scaffold just to take a look, and no charge either way.
- Fully Insured
- 10-Year Guarantee
- 5-Star Rated
Quick Free Estimate - No Obligation
We're not just roofers – we're your neighbours.
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.
Know the Signs It Is Time for New Gutters, Not Another Repair
Guttering rarely fails all at once. It gives you plenty of warning first. Catch a single fault early and a repair often does the job, but a run that keeps failing is telling you something.
Watch for these:
- Water spilling over the front edge during any steady rain
- Gutters sagging or pulling away from the fascia board
- Joints that split and leak again within weeks of resealing
- Damp patches or green staining running down the wall below
- Cracks, splits or brittle, faded plastic along the length
- Plants or moss growing out of a blocked, silted run
- Peeling paint or rot on the fascia behind the gutter
One split joint or a loose bracket is usually a straightforward Gutter Repairs job, not a full replacement. The picture changes when the whole run is past its best. If your guttering is more than twenty years old, sags in several places, or the repair bill creeps past half the cost of new, replacement is the sensible call. You get a fresh system with new brackets, clean falls and a guarantee, instead of patching the same tired plastic season after season.
uPVC, Aluminium, Cast Iron or Steel — Match the Material to Your Home
Four materials cover almost every guttering job around here. Each suits a different home, budget and lifespan. In short: uPVC is the low-cost, low-fuss choice for most houses; aluminium lasts far longer and shrugs off heavy rain; cast iron is the traditional look for period and listed homes; galvanised steel gives a modern metal finish for less than cast iron. A survey settles which one fits your roofline and your budget.
Ryan Tate, who runs our roofline work, fits every one of these systems. He will talk you through which material suits your home, your street and how long you want it to last — in plain terms, not a sales pitch.
| :-: | :-: | :-: | :-: |
| Material | Typical cost (per m) | Typical lifespan | Best for |
| uPVC | £35–£60 | 15–25 years | Most homes; low cost, quick to fit, little upkeep |
| Aluminium | £60–£120 | 30+ years | Larger homes and heavy rainfall; seamless runs, low maintenance |
| Cast iron | £80–£150 | 50+ years | Period and listed homes needing the traditional look |
| Galvanised steel | £45–£90 | 25–30 years | A modern metal finish at less cost than cast iron |
- **uPVC*is light, cheap and quick to fit, and it never needs painting. It handles the weather well on a standard house, which is why most homes in and around Market Harborough run it.
- **Aluminium*comes in long runs with very few joints, carries more water than plastic, and lasts decades — our Aluminium & Zinc Guttering page covers it in full.
- **Cast iron*gives the deep, traditional profile older homes were built with. On a period or listed property it can be the right choice, and the Communities NI guidance on gutters and downpipes explains why heavy cast metal often suits older buildings best.
- **Galvanised steel*gives a clean, modern metal line for less than cast iron, with a zinc coating that holds off rust for decades.
Half-Round or Ogee — Pick the Profile That Suits Your Roofline
Material is one choice; profile is the other. The profile is the shape of the gutter you see from the ground. The two you will meet most are half-round and ogee, and they do not look or perform the same.
Half-round is a simple U-shaped trough. Water runs through it with little resistance, and debris washes away rather than sticking, so it clogs less often. Ogee has a flat back and a decorative front edge, sits tight to the fascia, and holds more water for its size. On a lot of newer homes around Great Glen and Kibworth Beauchamp, ogee is the standard fit because it matches the squared-off look of the roofline.
The right profile often comes down to what the rest of the street runs and how much rain the roof throws off. A large roof or a valley that funnels water may need the extra capacity of a deeper ogee or a bigger half-round. We check the roof area and the pitch before recommending a size, so the new run copes with a heavy August downpour, not just light drizzle.
Seamless Aluminium — Fewer Joints Mean Fewer Leaks
Every joint in a gutter is a spot that can leak one day. Standard uPVC comes in short lengths clipped together, so a long run can have a dozen joints or more. Seamless aluminium is made to the exact length of your roofline in one continuous piece, so the only joins are at the corners and outlets.
Fewer joints means fewer weak points, and that is the main reason people move to it. Seamless aluminium also carries more water than plastic, which helps on a big roof or a home that catches the weather. It costs more than uPVC upfront, but it lasts far longer and asks almost nothing of you once it is up. On a period home in Lubenham or a larger house in Foxton, it is often the choice that pays off over time.
What New Guttering Costs in Market Harborough
Three things set the price: the material, how much guttering you need, and how easy the roofline is to reach.
As a general guide, uPVC runs roughly £35–£60 per metre fitted, galvanised steel £45–£90, aluminium £60–£120, and cast iron £80–£150. For a typical semi-detached house, a full uPVC replacement usually lands around £600–£1,000, rising to roughly £1,000–£1,600 for aluminium. A guttering specialist charges somewhere near £55–£65 an hour, and most homes fit in a day or two.
What pushes a price up or down:
- **Length of guttering*— a detached home with a big roofline needs far more than a small terrace
- **Material and profile*— cast iron and seamless aluminium cost more to supply and fit than standard uPVC
- **Access*— a high, awkward roofline or one over a conservatory may need scaffold or a tower
- **Fascia condition*— rotten board behind the gutter has to be sorted before new brackets go up
- **Downpipes and corners*— more outlets, bends and downpipes mean more fittings and labour
These are general market ranges, not a quote for your home. Two houses the same size can price very differently once access and fascia condition come into it. The only way to a firm figure is a proper survey — which is exactly what our free drone roofline survey gives you, followed by a clear written price with nothing added later. A fixed price needs a survey.
From First Bracket to Final Downpipe — Your Installation Day
A guttering replacement follows the same order on every job:
- Old guttering and downpipes taken down and cleared away
- Fascia board checked, and any rot repaired or replaced first
- New brackets set to a correct fall toward the outlets
- New gutter run fitted, with joints or seamless lengths sealed
- Downpipes fitted and connected to the drain or soakaway
- Full run tested with water, and the site left clean
Most homes take one to two days, weather allowing. Setting the fall is the part that matters most — get it right and water runs straight to the outlet instead of sitting and overflowing. We give you a realistic timeframe before we start, and you will know who is turning up and roughly how long they will be there.
Look After New Guttering and It Repays You for Decades
New guttering lasts longest when small jobs get done on time. None of this needs a specialist — just a look, a couple of times a year.
- Clear leaves and silt from the run each autumn
- Check the joints and brackets after a hard winter
- Watch for water spilling over the edge in heavy rain
- Keep an eye on the fascia below for damp or staining
A blocked gutter is the most common cause of overflow, and it undoes even a brand-new run. Ten minutes clearing an outlet in October saves a soaked wall in January. If you spot any warning sign, book a free drone roofline survey and we will show you exactly what is going on.
Why Market Harborough Homeowners Call Tate & Sons First
You are not just buying gutter — you are buying whoever fits it. Ryan Tate runs our roofline and guttering work, and he is on site for the job, not just the man who quotes it. He sets the falls, fits the runs and connects the downpipes himself, so the work is done by the same hands that measured it up.
Founder Michael Tate started his apprenticeship at sixteen and built Tate & Sons on one rule: fix the cause, not just the symptom. He surveys every job to find why the old guttering failed — a rotten fascia, a wrong fall, a blocked outlet — so the new run does not repeat it. Between us we carry over 45 years of combined experience, hold NVQ Level 2 and 3 qualifications in Roofing Occupations, and keep CSCS cards and NFRC trade-body membership. Read more about the people behind the work on our About Tate & Sons Roofing page.
Areas We Serve Across Market Harborough and the Harborough District
We fit and replace guttering across Market Harborough and the surrounding Welland Valley villages. If your area is not on the list below, call us anyway — if you are nearby, there is a strong chance we cover you.
- Market Harborough (LE16)
- Great Bowden (LE16 7)
- Little Bowden (LE16 8)
- Lubenham (LE16 9)
- Foxton (LE16 7)
- Medbourne (LE16 8)
- Kibworth Beauchamp (LE8)
- Great Glen (LE8 9)
- Fleckney (LE8 8)
- Husbands Bosworth (LE17 6)
- Desborough (NN14 2)
Got Questions?
Your Guttering Questions, Answered Properly
How do I know if I need new gutters or just a repair?
If the trouble is one split joint or a loose bracket, a repair usually fixes it. Replacement makes sense once the run is more than twenty years old, sags in several spots, or keeps leaking after each reseal. A good rule is the repair bill: if it creeps past half the cost of new guttering, you are better off with a fresh system and a guarantee. A quick survey tells you which way to go, with no pressure to spend more than the job needs.
Which gutter material is best — uPVC, aluminium or cast iron?
There is no single best; it depends on your home and budget. uPVC is cheap, light and fine for most houses, lasting 15 to 25 years. Aluminium costs more but runs seamless and lasts 30 years or more, which suits larger homes and heavy rain. Cast iron gives the traditional look for period and listed properties, and galvanised steel offers a modern metal finish for less than cast iron. We match the material to your roofline at the survey.
What is the difference between half-round and ogee gutters?
Half-round is a simple U-shape that lets water and debris run through easily, so it clogs less. Ogee has a flat back and a decorative front, sits tight to the fascia, and holds more water for its size. Ogee is common on newer homes because it matches a squared-off roofline, while half-round suits period and traditional houses. The best choice often comes down to the look of your street and how much rain your roof throws off.
Are seamless gutters worth the extra cost?
For many homes, yes. Seamless aluminium is made to the length of your roofline in one piece, so the only joins are at corners and outlets. Fewer joints means fewer places to leak, and it carries more water than plastic on a big roof. It costs more upfront than uPVC, but it lasts far longer and needs almost no upkeep. On a larger or period home, it often works out cheaper over its full life.
How long does guttering installation take?
Most homes take one to two days, depending on size and access. A small terrace can be done in a day, while a large detached house with several downpipes takes longer. Awkward access over a conservatory or a very high roofline can add time if scaffold or a tower is needed. We give you a realistic timeframe at the survey, so you know what to expect before we start.
How much does it cost to replace guttering in Market Harborough?
As a general guide, uPVC runs around £35 to £60 per metre fitted, aluminium £60 to £120, and cast iron £80 to £150. A full uPVC replacement on a typical semi-detached house usually lands around £600 to £1,000, rising to roughly £1,000 to £1,600 for aluminium. The final figure depends on length, material, access and fascia condition. A free drone roofline survey gives you an exact written price rather than a rough estimate over the phone. A fixed price always needs a survey first.
Can you replace the fascia and soffit at the same time?
Yes, and it often makes sense to. The fascia board carries the gutter brackets, so if it is rotten there is no solid fixing for a new run. Doing both together means one visit, one set of access, and a roofline that looks and works as one job. We check the fascia at the survey and tell you straight whether it needs replacing or is sound enough to keep.
Do you match new guttering to a period or listed home?
We do. On older and listed homes the profile and material matter, and cast iron or a cast-iron-style aluminium keeps the traditional look. We check any conservation or listing restrictions before quoting, so the new guttering suits the building and keeps the planners happy. Parts of Great Bowden and Foxton sit in areas where visible roofline changes get a closer look, and we handle that as part of the job.
Book Your Free Drone Roofline Survey Today
See exactly what your guttering needs before any work starts. No ladders, no pressure — just a clear picture from a local Market Harborough team.
Every week a tired gutter keeps spilling, rainwater works deeper into the wall and fascia behind it. A quick, free survey today tells you exactly where you stand — and often the fix is smaller and cheaper than you feared. Book now, get an honest quote, and protect your home before the next downpour finds the weak spot.
ð 5 Hood Close, Market Harborough, LE16 9XS
ð 01858 457600
Call the Market Harborough team today on 01858 457600, or request your free drone survey online. We're already working across your area.
Book Your Free Drone Roof Survey
See exactly where your roof stands, with no obligation and no pressure. Call our Market Harborough team or request your free drone survey today.
Get in Touch
Tate & Sons Roofing — Market Harborough Office
5 Hood Close, Market Harborough, LE16 9XS
📞 01858 457600
✉️ [email protected]