🏠 Trusted Local Roofers
Metal Roofing in Hinckley
Metal roofing in Hinckley has moved on from the corrugated barn look most people still picture. Aluminium, zinc and steel systems now cover extensions, garages and whole contemporary homes right across the borough. They stand up to whatever the weather along the A5 corridor throws at them.
Tate & Sons Roofing fits and repairs metal roofing across Hinckley, Burbage and the wider Hinckley & Bosworth area. We work as a full roofing contractor across Hinckley, not a single-material specialist.
This page covers when metal roofing beats tile or felt. It looks at which system and metal suit your property, what installation involves, and real cost ranges for the area. Start with a free drone survey and a written quote before anything is agreed. There is no scaffold just to take a look, and no charge either way.
- Fully Insured
- 10-Year Guarantee
- 5-Star Rated
Quick Free Estimate - No Obligation
We're not just roofers – we're your neighbours.
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.
Know When Metal Roofing Is the Right Call for Your Roof
Metal roofing earns its place on more than sheds these days. It suits flat or low-pitch extensions where felt keeps failing. It also suits garages, outbuildings and contemporary new builds where a crisp, modern line matters as much as performance.
Look out for these signs that metal roofing is worth considering:
- A flat felt or GRP roof on an extension that keeps needing patch repairs
- An agricultural or outbuilding roof with rusting, ageing corrugated sheets
- A garage roof past its best that never matched the house anyway
- A new extension or garden room where you want a genuinely long-life covering
- A renovation where a lightweight covering suits the existing structure better than heavy tile
Metal roofing usually is not the right fit for a standard pitched tile roof on a typical Hinckley semi. Concrete or clay tile remains the standard choice there. It is also rarely accepted on the main roof of a listed building, where planning authorities expect traditional materials. Our free drone survey gives you an honest answer either way, with footage rather than guesswork.
Standing Seam, Metal Tile or Corrugated Sheet — Pick the System That Suits Your Roof
Metal roofing covers three distinct systems, and each suits a different job. Standing seam panels use raised, interlocking joints running up the roof. There are no visible fixings, which gives a smooth, contemporary finish. It is the system most homeowners picture when they think of a premium metal roof.
Metal tile panels are pressed to mimic the look of clay or slate tile. They keep the light weight and long lifespan of metal underneath. That makes them useful where planning wants a familiar profile on the street.
Corrugated or trapezoidal sheet is the practical option for garages and agricultural buildings. It is fitted in large sheets with exposed fixings, and it costs the least of the three systems.
If a smooth, seamless finish is what you want, our dedicated standing seam roofing page covers that system in full detail. Where a garage or workshop calls for straightforward sheet, our corrugated roofing page covers that option on its own terms.
Daniel Whitmore, our project manager, fits all three systems. He will talk you through which one matches your roof shape, your budget and how the finished job needs to look.
Aluminium, Zinc or Steel — Choosing the Right Metal for Your Home
The metal underneath matters as much as the system on top. Aluminium is light, will not rust, and takes powder-coated colour well. That makes it popular for contemporary extensions we fit around Market Bosworth. It gives a clean, modern finish that sits well against the period stonework nearby.
Zinc develops a soft, self-healing patina over time. It is the metal most often specified on architectural and heritage-sensitive projects, though it carries the highest price of the three. Steel, usually galvanised or coated for corrosion resistance, is the most affordable option. It remains a dependable choice for garages, outbuildings and straightforward extensions.
Every metal handles Hinckley weather differently at the fixing points. That matters more than the finish once wind gets involved, which we cover shortly.
The Federation of Traditional Metal Roofing Contractors sets out useful detail on how aluminium performs as a roofing material. It explains why the metal resists corrosion so well, and why folded rather than soldered detailing is needed at joints.
| :-: | :-: | :-: | :-: |
| Metal | Typical cost per m² | Typical lifespan | Best for |
| Aluminium | £90–£150 | 45–70 years | Contemporary extensions, wind-exposed sites, lightweight structures |
| Zinc | £110–£220 | 60–100+ years | Architectural and heritage-sensitive projects, premium finish |
| Steel | £70–£120 | 40–60 years | Garages, outbuildings, straightforward extensions, value-driven jobs |
What a Metal Roof Really Costs in Hinckley
Cost depends on metal, system, roof size and access. As a general guide, corrugated steel on a garage or outbuilding typically runs £70 to £90 per m². Aluminium panel or standing seam systems typically run £90 to £150 per m². Zinc runs £110 to £220 per m² given its premium specification. For a garage or extension-sized roof, whole-job totals usually land between £6,000 and £12,000. Larger standing seam projects on bigger extensions run higher.
What pushes a price up or down:
- **Metal choice*— steel costs least, zinc costs most
- **Roof pitch and complexity*— steeper pitches and multiple valleys add scaffolding and labour
- **Strip-out and disposal*— removing an old felt or corrugated roof typically adds £500–£1,500
- **Access*— a garden room roof reached easily costs less to scaffold than one boxed in by buildings
- **Fixing specification*— exposed sites along the A5 and M69 corridor often need upgraded fixings, which adds cost
- **Insulation upgrade*— bringing the roof build-up up to current Building Regs standard typically adds £500–£1,500
Labour typically makes up 40 to 60 percent of the total. Roofers in this part of Leicestershire generally charge in the region of £200 to £300 per day. These are general market ranges, not a quote for your roof. Two extensions the same size can price very differently once metal, pitch and access are factored in. A fixed price needs a survey.
Getting Ready — Planning Permission, Building Regs and Fixing for Local Wind
Most metal roofing on extensions, garages and outbuildings does not need planning permission. It usually needs to stay within permitted development limits on size and height. Permission is more likely on a listed property or within a conservation area. It is also more likely where the new roof changes the shape of the roofline.
Building Regulations approval is a separate matter, and it usually does apply. It covers weather resistance, structural strength, insulation and ventilation. We handle the Building Control paperwork and sign-off as a standard part of the job.
Wind matters more to metal roofing than to tile. A metal roof relies on its fixings and seams staying tight, rather than sheer weight holding it down. Properties along the old Watling Street corridor take a harder battering from wind-driven rain. So does the exposed ridge near Higham on the Hill, compared with a sheltered street in Hinckley town centre.
UK wind load standards call for closer clip spacing and stronger fixings at roof edges, corners and ridges. That is exactly where wind uplift concentrates first. We calculate the fixing specification against a property's height, position and exposure, not a standard layout pulled off a shelf.
What Installation Day Looks Like, Start to Finish
A metal roofing installation follows the same order on every job:
- Scaffold or roof edge protection erected and the site made safe
- Old covering stripped back to the deck or timber structure
- Deck, timbers and battens checked, with any rot replaced
- Breathable membrane, insulation and ventilation fitted to current standards
- Metal panels or sheets fixed from eaves up to ridge, with clip spacing set for the site
- Flashings, verges and ridge details fitted to shed water cleanly
- Site cleared and the finished roof checked before we leave
You do not usually need to leave the property while metal roofing is fitted. Expect noise from cutting and fixing above. We protect driveways, borders and anything stored below the working area for the duration.
A garage or single-extension metal roof usually takes 2 to 4 working days. A larger standing seam roof on a full extension typically runs 4 to 7 days. Panels need accurate setting out and careful seaming. Weather has the final say. Wet or high-wind days can push a job back, so we build a realistic allowance into every schedule.
Checking the Work and Keeping a Metal Roof Performing for Decades
A well-fitted metal roof needs very little upkeep, but a couple of myths are worth clearing up first. A properly insulated metal roof with a solid deck underneath is no noisier in the rain than a tiled roof. The deck and insulation absorb the sound before it reaches the room below. The echoing sound people remember comes from uninsulated barns and sheds, not a residential system built to current standards.
Metal roofing does not attract lightning any more than any other roof covering. Being non-combustible, it is a safer covering to have overhead if lightning does strike nearby.
To keep a metal roof performing for its full lifespan:
Condensation is a genuine risk if ventilation is skipped, not a flaw in the metal itself. Warm, moist air rises from inside a building and meets a cold metal deck. It turns to condensation if the build-up is not ventilated correctly. We specify a breathable membrane and proper airflow on every job as standard, not as an optional extra.
- Clear gutters and valleys of leaves and debris each autumn
- Check flashings around abutments and rooflights after storms
- Avoid walking outside marked access points — most systems have specific safe-tread zones
- Book a free drone survey every few years, or after any major storm
None of this needs a specialist visit — just a regular look, and a call to us if anything seems off. Solar panels can usually be fitted to standing seam roofing using clamp systems that do not penetrate the panel at all. That is one reason metal roofing suits homeowners planning solar as a next step.
Why Hinckley Homeowners Choose Tate & Sons for Metal Roofing
Metal roofing rewards a fitter who has done it properly before. Seams and fixings that are slightly wrong show up as leaks and staining within a couple of winters. Daniel Whitmore, our project manager, runs the day-to-day on site. He specialises in full re-roofs and leadwork. Standing seam and metal tile detailing has become a bigger part of our work across Hinckley's newer extensions. He is part of the same crew that turns up to fit your roof, not just the person who quoted it.
Founder James Tate started out on the tools more than 20 years ago and still quotes the majority of jobs personally. The person weighing up your roof is the one standing behind the finished work. Between us we bring 40 years of combined team experience, hold NVQ Level 2 and 3 qualifications in Roofing, and carry CSCS cards. Sophie Bennett, our office manager, keeps quotes, scheduling and aftercare running smoothly from the first phone call onwards. Read more about the people behind the work on our About Tate & Sons Roofing page.
Areas We Serve Across Hinckley and Bosworth Country
We fit and repair metal roofing across Hinckley and the surrounding borough. If your area is not on the list below, call us anyway — there is a strong chance we already cover you.
- Hinckley (LE10)
- Burbage (LE10)
- Barwell (LE9)
- Earl Shilton (LE9)
- Sapcote (LE9)
- Sharnford (LE10)
- Wolvey (LE10)
- Higham on the Hill (CV13)
- Sutton Cheney (CV13)
- Stoke Golding (CV13)
- Market Bosworth (CV13)
- Nuneaton (CV10 / CV11)
- Bedworth (CV12)
Got Questions?
Your Metal Roofing Questions, Answered Properly
How long does metal roofing actually last?
Metal roofing typically lasts 40 to 70 years depending on the metal and system used. Galvanised or coated steel sits at the shorter end, usually 40 to 60 years. Aluminium runs 45 to 70 years, and zinc can pass 100 years with the right detailing. Lifespan depends heavily on correct installation. Poor flashing or the wrong fixings will shorten any system, whatever the metal. A free drone survey lets us check existing metal roofing and give you an honest read on how much life is left.
Is a metal roof noisier than tile in the rain?
No, not when it is fitted properly. A metal roof built with a solid deck, breathable membrane and insulation underneath is no louder in the rain than a tiled roof. The deck and insulation absorb the sound before it reaches the room below. The noisy metal roof most people remember is an uninsulated barn or shed, not a residential system built to current standards.
How much does metal roofing cost in Hinckley?
As a general guide, corrugated steel typically costs £70 to £90 per m². Aluminium and standing seam systems run £90 to £150 per m², and zinc £110 to £220 per m² given its premium specification. Whole-job totals for a garage or extension-sized roof usually land between £6,000 and £12,000, with larger standing seam projects running higher. Metal choice, roof pitch, access and strip-out all affect the final figure. A fixed price always needs a survey.
Do metal roofs rust?
Steel can rust if the protective coating is damaged or poor quality. That is why we only fit galvanised or properly coated steel systems. Aluminium does not rust at all, since it forms its own protective oxide layer on the surface. Zinc develops a stable patina that protects the metal underneath rather than corroding it. Choosing the right metal for your site and budget avoids most rust concerns before they start.
Can solar panels be fitted to a metal roof?
Yes, and standing seam systems suit solar panels particularly well. Clamp-based mounting systems attach directly to the raised seam without a single fixing penetrating the metal. That keeps the roof watertight and avoids the drilled fixing points a tiled roof needs for the same job. It is one reason metal roofing appeals to homeowners planning solar as a next step.
Does metal roofing interfere with WiFi, TV or mobile signal?
No, metal roofing does not block or interfere with WiFi, mobile signal or TV reception in any way that matters in practice. Signal loss through any roof covering usually comes down to distance from a router or line-of-sight to a mast, not the material overhead. Satellite dishes and aerials mounted on or near a metal roof work exactly as they would on tile. This is one of the questions we get asked most from customers who have read about older, uninsulated agricultural buildings.
Can you safely walk on a metal roof for maintenance?
Only with care, and only in the areas the system is designed for. Standing seam and metal tile panels can take occasional foot traffic along the seams or designated safe-tread zones. Walking across the flat pan of a panel can dent or mark it. Corrugated sheet on garages and outbuildings needs roof ladders or crawl boards to spread your weight safely. If you need regular roof access for window cleaning, tell us at the design stage so we can build in proper access points.
Can metal roofing be used on a listed building or in a conservation area near Hinckley?
It depends on the building and its setting, not a blanket rule. Villages such as Stoke Golding and Market Bosworth carry a strong concentration of listed and character properties. The local planning authority looks closely at visible roofing materials there. Metal roofing is more likely to be accepted on a rear extension or outbuilding. Traditional materials are usually expected on the principal roof of a listed property. We check a property's planning status before quoting so there are no surprises.
Does the wind along the A5 and M69 change how a metal roof should be fixed?
Yes, and it is one of the first things we check on an exposed site. Properties along the old Watling Street corridor face harder wind-driven rain and stronger gusts. So does the ridge near Higham on the Hill, compared with sheltered streets in Hinckley town centre. That means tighter clip spacing, stronger fixings at edges and corners, and a specification built around the site's actual exposure. We factor this into every quote for a property in those areas.
Book Your Free Metal Roof Survey Today
See exactly what your roof needs before any work starts. No ladders, no pressure — just a clear picture from a local Hinckley team.
Every season an ageing corrugated roof or failing flat covering is left alone, rust spreads further and fixings work looser in the wind. A straightforward re-cover can turn into a bigger repair bill. A quick, free survey today tells you exactly where you stand. Often the right answer is smaller and more affordable than you feared. Book now, get an honest quote, and get your metal roofing sorted properly — first time.
Call the Hinckley team today on 01455 242595, or request your free drone survey online. We're already working across your area.
Book Your Free Drone Roof Survey
See exactly where your roof stands, with no obligation and no pressure. Call our Hinckley team or request your free drone survey today.
Get in Touch
Tate & Sons Roofing — Hinckley Office
10 Brosdale Drive, Hinckley, LE10 0SW
📞 01455 242595
✉️ [email protected]